Melissa 746-086 User Manual download pdf (Page 15)

PRIOR TO FIRST USE

Each individual appliance is checked at the

factory, but for safety’s sake, please check

carefully after unpacking for damage during

transport. Check for visible damage (e.g. cracks

or scratches). If the appliance appears to have

been damaged, contact the shop where you

bought it, and do not use it until it has been

checked by an authorised specialist.

Clean all parts that come in direct contact with

food before using the appliance for the first time.

Fitting the blender shaft

Fit the blender shaft to the motor unit by inserting

the spindle into the middle of the shaft, and into

the socket on the motor unit. Carefully turn the

shaft anticlockwise until the arrow on the outside

is aligned with the closed padlock symbol (4) on

the motor unit and you hear a slight click. To

remove the shaft, turn it carefully clockwise until

the arrow is aligned with the open padlock

symbol (4) on the motor unit.

Blending in the jug

Attach the blender shaft to the motor unit as

described under Fitting the blender shaft. Place

the food items to be blended into the jug (7). Hold

the jug firmly with one hand. Place the blender

shaft into the jug until it touches the food items

and switch on by pressing one of the speed

selection switches (2) and holding it down. The

blender will run as long as you hold the button

down.

NB: We recommend the blender does not run

for more than 1 minute at a time when blending

or chopping. Allow the appliance to cool for a

little while before continuing.

Tips

•Wash fruit and vegetables thoroughly before

blending them.

• Peel fruits such as oranges, lemons,

mandarins, mango, kiwi, melon and pineapple

before blending.

• Remove any pips, stones etc from fruit before

blending.

• Slice fruit and vegetables into small pieces

before putting them into the jug.

• Start at low speed (I) to avoid splashes in the

open jug. Switch to high speed (II) if and when

required.

CLEANING

• Remove the plug from the socket before

cleaning.

• Allow the blender to cool before dismantling

and/or cleaning.

• Do not use scouring powder, steel wool or

other aggressive cleaning materials, as they

can scratch the surface of the appliance.

• Use a damp cloth (warm water) and a little

detergent if necessary. Wipe off with a dry

cloth.

•Wash removable parts in warm water with a

little detergent added. Rinse all parts

thoroughly and dry before replacing them.

•Take great care when cleaning and handling

the blades as they are very sharp.

• Do not immerse the motor unit in water. Do

not allow water to seep into it.

INFORMATION ON DISPOSAL OF THIS

PRODUCT

Please note that this Adexi product is marked

with this symbol:

This means that this product must not be

disposed of together with ordinary household

waste, as electrical and electronic waste must be

disposed of separately.

In accordance with the WEEE directive, every

member state must ensure correct collection,

recovery, handling and recycling of electrical and

electronic waste. Private households in the EU

can take used equipment to special recycling

stations free of charge. In some member states

you can, in certain cases, return the used

equipment to the retailer from whom you

purchased it, if you are purchasing new

equipment. Contact your retailer, distributor or the

municipal authorities for further information on

what you should do with electrical and electronic

waste.

IM_746086 02/04/07 10:47 Side 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

Melissa 746-086 User Manual Page 15

Comments to this Manuals

Related products and manuals for Blenders Melissa 746-086